Products
1/4" Flare Nut w/ Tailpiece
$ 2.75
These flare hexnuts attach to any 1/4" male flare threads, such as those found on MFL disconnects. You have the option of either a 1/4" barb or 5/16" barb; the former is used for liquid (beer) lines, whereas the latter is common for gas (CO2) lines. Swivel nuts are chrome-plated, but barbs are stainless.
6- Way Gas Manifold
$ 69.00
Gas manifold with shutoffs. Hook up 6 gas lines at once.
Aluminum Gas Manifold - 1/4" Flare (KOMOS)
$ 30.00
If you are connecting multiple kegs to your gas supply a manifold is the best way to distribute that gas and give you the flexibility to have much more individual control over your dispensing. This KOMOS manifold features 1/4" flare gas inlet and check valves that provide the ability to choose the types of connectors and sizes you will use to co...
Corny Keg Post
$ 8.95
These stainless steel posts fit Cornelius kegs and include universal poppet assemblies. For easy identification, the gas posts are notched at the hex base, whereas the liquid posts are not. 19/32"-18 threads
Double Offset Draft Tower Wrench - (KOMOS)
$ 19.75
This double offset wrench is designed to make it much easier to remove nuts from shanks in draft towers, coffin boxes, jockey boxes, or other tight spots where a traditional wrench can't operate. Features a 1 1/16" 12-point wrench on one end and a 1 1/8" 12-point wrench on the other end. These are the most common shank nut sizes. This wrench i...
Faucet- Chrome with Stainless Lever
$ 22.00
A standard chrome plated faucet that attaches to normal shanks [1 1/8” – 18 Thread (North American Beer Industry Standard)]. Do be aware that this plunger design does stick if the faucet isn't used frequently; this is caused by small amounts of beer moving into the forward chamber with the piston and then drying. Unlike many other chrome faucets...
Faucet- Stainless Steel
$ 35.00
A standard stainless faucet that attaches to normal shanks [1 1/8” – 18 Thread (North American Beer Industry Standard)]. Unlike chrome faucets, stainless will last forever without ever contributing off-flavors. Do be aware that this plunger design does stick if the faucet isn't used frequently; this is caused by small amounts of beer moving into...
Fiber Washer For CO2 Regulators
$ 0.99
If you have a regulator that requires fiber washers you must replace it every time you swap or fill a tank. The special compression design ensures better performance and a longer lifespan compared to standard gaskets. Proper installation helps prevent leaks and other potential CO2 regulator issues. Do not use this with KOMOS or Taprite regulator...
Kegging Equipment Kit- Complete
$ 300.00
Contains 5 Gallon Stainless Steel Ball Lock Keg (select used or new), Black Liquid Disconnect with 1/4" barb, Gray Gas Disconnect with 1/4" MFL, Hose Clamps, Picnic Dispensing Faucet, Hex Nuts For MFL Disconnects, Taprite Primary Dual Gauge Regulator, Swivel Barbs For MFL Disconnect, Picnic Tap and Tubing, Gas Tubing, and 5lb CO2 Tank ...
Mark II Keg Washer
$ 100.00
Conserve time, energy, and water! Mark’s Mark II Keg Washer™ is designed to clean and sanitize large vessels like cornelius kegs and carboys. It is also serves as a sanitation container for miscellaneous items such as airlocks, thermometers, tubing, keg fittings, and more. Includes adapters to clean tubing. You can even set it up to hook to keg ...
Nukatap - Gen 2 Stainless Faucet with Flow Control
$ 66.50
We REALLY like these forward sealing Nukatap faucets- they're the most innovative faucet we've seen since Perlick, and at a more reasonable price! Made entirely of stainless steel, these will last a long time , are completely rebuildable, and due to their unique design, off-flavors and "sticking" are prevented. Flow control helps with those fini...
Nukatap- Stainless Faucet
$ 46.50
We REALLY like these forward sealing Nukatap faucets- they're the most innovative faucet we've seen since Perlick, and at a more reasonable price! Made entirely of stainless steel, these will last a loooooong time and due to their unique design, off-flavors and "sticking" are prevented. Addtitionally, the faucet tips are interchangeable, allowi...
Nylon Washer For CO2 Regulators (KOMOS)
$ 1.09
The nylon washer helps form an airtight seal between the KOMOS regulator and your gas cylinder. Great to have on hand for when one is lost or wears out. Should be replaced regularly to ensure the regulator to tank connection stays gas-tight.
Poppet
$ 2.75
Universal poppet assembly for homebrew keg posts. Will work for ball lock or pin lock posts. We've refurbished dozens, if not hundreds, of kegs using these! Easy to install.
Sankey Coupler (Stainless)
$ 46.00
Also known as a D-style coupler, this fits domestic commercial kegs. All contact points for the beer are made out of 304 grade stainless steel. This quality coupler will provide many years of reliable use without imparting off-flavors. **Does not include the beer nut/tailpiece.** This may be ordered separately here.
