Products
1/4" Stainless Tailpiece
$ 4.75
Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...
5/16" Stainless Tailpiece
$ 4.50
Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...
Aluminum Gas Manifold - 1/4" Flare (KOMOS)
$ 30.00
If you are connecting multiple kegs to your gas supply a manifold is the best way to distribute that gas and give you the flexibility to have much more individual control over your dispensing. This KOMOS manifold features 1/4" flare gas inlet and check valves that provide the ability to choose the types of connectors and sizes you will use to co...
Ball Lock Line Cleaner w/ Hand Pump
$ 15.00
Make quick and easy work of your draft lines with the Ball Lock Line Cleaner and Hand Pump. Create pressure with the hand pump and pump line cleaner through your ball lock disconnect and draft lines with the included PCO tee piece. Clean up without wasting CO2 or making a full batch of line cleaner. You can hook it up to just about any PET so...
Double Offset Draft Tower Wrench - (KOMOS)
$ 19.75
This double offset wrench is designed to make it much easier to remove nuts from shanks in draft towers, coffin boxes, jockey boxes, or other tight spots where a traditional wrench can't operate. Features a 1 1/16" 12-point wrench on one end and a 1 1/8" 12-point wrench on the other end. These are the most common shank nut sizes. This wrench i...
Dual Body CO2 Regulator - (KOMOS)
$ 115.00
The KOMOS Dual Body CO2 Regulator is perfect for serving two different beers at two different pressures using a single CO2 tank. This beefy, industrial-grade regulator will serve you well for years to come. The robust dual-body and precision diaphragms provide high flow rates, and the pressures can be easily and precisely adjusted with the hand ...
Fiber Washer For CO2 Regulators
$ 0.99
If you have a regulator that requires fiber washers you must replace it every time you swap or fill a tank. The special compression design ensures better performance and a longer lifespan compared to standard gaskets. Proper installation helps prevent leaks and other potential CO2 regulator issues. Do not use this with KOMOS or Taprite regulator...
Nylon Washer For CO2 Regulators (KOMOS)
$ 1.09
The nylon washer helps form an airtight seal between the KOMOS regulator and your gas cylinder. Great to have on hand for when one is lost or wears out. Should be replaced regularly to ensure the regulator to tank connection stays gas-tight.
Premium Dual Gauge CO2 Regulator - (KOMOS)
$ 69.00
The KOMOS Dual Gauge CO2 Regulator is a beefy, industrial-grade regulator that provides consistent, worry-free performance. The robust body and precision diaphragm provide high flow rates, and the pressure can be easily and precisely adjusted with the hand dial. Extra thick stainless gauges come with rubber bumpers for added protection. The di...
Pressure Relief Valve
$ 7.75
The most common relief valve. Fits most Cornelius and Firestone style kegs. Long body with spring with grey top and pull ring. Max. pressure rating: 100 psi
Stainless Steel Carbonation and Line Cleaning Cap
$ 15.75
This stainless steel ball lock cap features soda bottle threads, allowing you to convert any plastic soda bottle into a convenient growler. The cap is compatible with both ball lock gas and liquid disconnects, so you can charge the PET bottle before you leave the house and dispense it on the go. Attach 3/16" or 1/4" ID tubing to the barb to serv...
Stainless Steel Sanke D-Style Coupler w/ PRV - (KOMOS)
$ 62.00
The KOMOS D-Style coupler is built for use with the most common commercial domestic Sanke kegs sold in the USA. The stainless steel body and probe construction are built to last. The coupler comes without fittings so it can be adapted to suit your setup. The coupler is shipped without gas-IN or liquid-OUT connections so you can fit it out exactl...
Stainless Tailpiece Elbow - 3/16" ID
$ 8.25
Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...
Torpedo Keg Buoy Floating Dip Tube
$ 20.00
Ensure the purest pour from start to finish with the Torpedo Buoy™ floating dip tube. This set features a 3-inch metal dip tube, 23.5 inches of 1/4-inch ID silicone tubing, and a stainless steel ball float. Designed to fit any ball lock or pin lock homebrew keg, it is optimized for 5-gallon kegs but can be trimmed to suit 1.5 or 2.5-gallon sizes.
