Equipment
1/2" Auto-Siphon
$ 18.25
26" long 1/2" auto-siphon by Fermtech. Quickly and easily transfers liquids twice as fast as a 3/8" racking cane. Includes 6 feet of 1/2" vinyl tubing. Auto siphon clamp sold separately.
1/2" Stainless Ball Valve
$ 16.75
Built from 304 stainless steel, this ball valve features 1/2" FPT threads on each end. Perfect for kettles, pumps, chillers, or whatever else your system demands. Easy to clean. Just use two wrenches to separate the two piece valve.
12" Laboratory Thermometer
$ 7.00
If you're looking for a near-instant temperature reading, this laboratory thermometer is the way to go. Has an eye hole at the top for running string through if desired. Range 0- 220F; 0-120C.
24" Steel Spoon
$ 9.00
Perfect spoon for stirring wort or mash. You could also use it to eat cereal, but that might be just a little absurd.
6- Way Gas Manifold
$ 69.00
Gas manifold with shutoffs. Hook up 6 gas lines at once.
6.5 Gallon Bottling Bucket
$ 18.00
This bottling bucket includes a ported spigot with two gaskets. Makes bottling easy, especially when coupled with our filler wands.
6.5 Gallon Plastic Fermentor
$ 20.00
Food grade fermenting bucket with graduated markings showing volume. Includes a drilled/grommeted lid.
7.9 Gallon Plastic Fermentor
$ 31.50
Food grade bucket with graduated markings showing volume. Includes drilled/grommeted lid.
Airlock
$ 1.50
Used to allow CO2 release, while preventing oxygen intrusion. Two styles available.
Beer Wine Refractometer with ATC
$ 39.75
Refractometers measure sugar in an aqueous solution. Because they require such a small sample, they are a great alternative to hydrometers, which require several ounces of liquid and a test tube. This refractometer features Automatic Temperature Correction and both Brix and Specific Gravity scales. These are great for measuring the sugar content...
BIAB 24" X 26"
$ 8.75
24" X 26" nylon bag that works well for doing brew in a bag (BIAB) batches. Just place the bag in the kettle with your pre-heated brewing water, add crushed grains, and mash on! Can also be used for straining must in winemaking. Tested at 50lb burst strength. Reusable- just clean well after each use! We also stock a BIAB with handles for enhance...
BIAB with Handles
$ 15.50
Heavy duty 24" X 26" nylon bag with handles perfect for doing brew in a bag (BIAB) batches. Just place the bag in the kettle with your pre-heated brewing water, add crushed grains, and mash on! Handles make removal of the heavy spent grains much easier. Can also be used for straining must in winemaking. Reusable- just clean well after each use!
Big Daddy Dial Thermometer
$ 9.75
Easy to use stainless dial thermometer with 12" probe and clips onto the side of your kettle for constant temperature monitoring. Range 0- 220F.
Blichmann Hellfire Burner
$ 245.00
The most fiery burner on the market has what it takes to speed along your brew day. With enough power to keep a rolling boil on a 20 gallon batch of beer, this burner gets it done! Features include: •Dual mode capability; high power mode and high efficiency mode. Simple operation - just crank up the gas and adjust the damper for more power! Hi...
Brewer's Beast Equipment Kit
$ 189.99
Brewer's Beast® Equipment Kits The most complete equipment kit in the homebrew industry. The Brewer's BeAst includes every piece of equipment you need to make the finest batch of beer. Includes brew pot and PET carboy! Contains: • 6.5 gallon Primary Fermenting bucket• 5 gallon Carboy- PET• Carboy Brush• Bottling Bucket• Capper• Bottle ...
Brewer's Best Equipment Kit
$ 95.00
6.5 gallon Fermenting Bucket and Lid, Bottling Bucket with Spigot, Bottle brush, Bottle Capper, Auto-siphon, Hydrometer, Airlock, Basic Brewing Text, Pack of Cleaner, and Fermenter Thermometer. Fully-scalable as you grow and develop as a brewer. Things not included that you'll need: Large pot to boil in (called a kettle in the brewing world), a...
Brewers BEAST Stainless Kettle
$ 142.00
Available in both 8 and 16 gallon sizes, this is a great tri-clad kettle at a great price! Induction ready. Graduated Volume Markers are embossed, so they won't rub off with cleaning. The lid and handles are rubberized with silicone for comfort and heat dissipation. Wall thickness: 1mm Bottom thickness: 4mm This ported kettle includes two 1/2...
Brewers Best 1 Gallon Equipment Kit
$ 66.75
Brewer's BeAst's little brother - the 1 gallon Brewer's Best® Equipment Kit. Contains all the equipment you need to start brewing one gallon of craft beer. Equipment kit includes: 2 gallon Fermenting Bucket with Lid, Clear One Gallon Glass Jug, Econolock, Lab Thermometer, Siphon Hose with Shut-off Clamp, Easy Clean No-Rinse Cleanser, IO-Star...
Brewers Best Stainless Kettle
$ 58.75
Available in both 8 and 16 gallon sizes, this is a great economy kettle at a great price! Graduated Volume Markers are embossed and the lid is included. Wall and bottom thickness: 0.8mm. The ported option includes two 1/2" NPT welded ports and is great for the brewer looking to up their game a bit! Identical design, but with a wall and bottom ...
Brewers Best Stainless Kettle False Bottom
$ 62.50
Available in both 8 and 16 gallon sizes. This false bottom will fit either the Brewers Best Basic Kettle or the Brewers BEAST Kettle. A simple option for converting a kettle to a stainless mashtun or to help filter out hop debris from the boil. Dimensions: 8 gallon- 11.5"16 gallon- 15.5"
Brewzilla Neoprene Jacket
$ 27.00
Add some insulation to your Robobrew/Brewzilla/Digiboil to get better boils! These Jackets will fit both 35 L Robobrews and help keep the heat in for quicker and more vigorous boils. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 35 L Robobrew/Brewzilla/Digiboil with pump and without pump Made from thick neopre...
Brewzilla V4 Allgrain Brewery with Pump 110V
$ 599.99
FREE SHIPPING! This may not be in-store and we can drop ship it to you at no charge. The Brewzilla (formerly RoboBrew) is an all-in-one electric brewing system that has built in elements for heating and boiling, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain ...
Co2 Kit
$ 175.00
Contains: 5 lb. CO2 Tank (empty), Primary Dual Gauge Regulator (select Taprite or KOMOS), 5' Beverage Tubing 3/16" I.D., 5' Gas Tubing 5/16" I.D., Picnic Dispensing Faucet, Black Liquid Disconnect With 1/4" MFL, Gray Gas Disconnect With 1/4" MFL, Hex Nuts For MFL Disconnects, Swivel Barbs For MFL Disconnects and Hose Clamps. DOES NOT INCLUDE KE...
Cornelius Keg
$ 89.50
A cornelius keg (also known as a Corny or soda keg) is a metal container (keg) originally used by the soft drink industry, used to store and dispense homemade brews. Refurbished to hold pressure, meaning faulty components and gaskets have been replaced. You'll still need to clean/sanitize prior to kegging. These are Ball Lock Kegs, not Pin Lock....
Domed Stainless Steel False Bottom
$ 38.00
Available in a 9 or 12 inch diameter, these false bottoms perfectly fit round 5 gallon and 10 gallon water coolers, respectively. The design allows for heavy grain bills and even lautering for better efficiency during the sparge. Also suitable in converted sankey kegs. Made from stainless steel with 3/32” perforated holes on 5/32” centers. 3/8" ...
Fermentap Weldless Dial Thermometer
$ 29.75
A wonderful addition to your mashtun, kettle, or HLT. Complete assembly includes the dial thermometer and probe, bulkhead, and silicone gasket. Constructed from 304 stainless. Available with either a 2" probe (more suitable for kettles) or a 6" probe (more appropriate for a mashtun).
Fermentor Lid
$ 4.00
Drilled and grommeted for airlock. 7.9 gallon lid is gasketed.
Floating Thermometer
$ 7.00
It floats! It also has a rubber tip to help you hold it and prevent burning your fingertips. Not instant-read; it takes a few moments for the reading to read accurately. Check out the lab thermometer for something that reads more quickly.
Glass Carboy
$ 56.00
A classic for home brewers. These glass carboys are from Italy and come in multiple sizes. We recommend using the 6.5 gal for primary fermentation, the 6 gal for doing secondary fermentation on wine or beer, the five gal for secondary, and the 3 gal for small batches. NOTE: We do not currently ship glass. These are for in store pick up only. How...
Graincoat
$ 55.00
This heat insulation jacket is designed to be used with the Grainfather to keep heat contained in the boiler and maintain a constant temperature during your brew. Since we started using ours, we've noticed a big difference! Temperatures are more easily maintained and heating times are noticeably reduced. For those of you who brew in cooler clim...
Grainfather Connect Bluetooth Controller
$ 155.00
*New* Connect Controller Details: Automation without removing the fun of brewing, be as involved as you want to be! More automation means you can multitask or simply relax while brewing and then be alerted when to return for your next step. Use the Connect Control Box in conjunction with the Connect App for the ultimate brewing experience. Wat...
Grainfather with Bluetooth (120V)
$ 998.99
Buy from Asheville Brewers Supply and get your choice of free accessory- the Graincoat or Stainless Hop Spider! Simply write in the notes at checkout which you prefer! Also receive FREE SHIPPING! Grainfather Information: The Grainfather is your electric all in one brewing system to make beer from grain. The sleek look, user friendly design, and ...
Hydrometer
$ 7.00
15.5" long, with a solid metal base and easy-to-read 3-scale readout. Packaged, with instructions, in a tube with no hanger cap. Readings idealized at 60°F. Works for beer, wine, cider, mead, and mashes. Scales: Balling: 0-38% Potential ABV: 0-22% Specific Gravity: 0.990 - 1.170
Hydrometer Test Cylinder
$ 4.50
Used to hold the sample for taking gravity or proof readings. Available in plastic or glass. NOTE: If proofing spirits, you MUST use glass; the plastic can't handle high octane.
Immersion Chiller (25ft)
$ 85.00
3/8" Copper Wort Chiller with hose fittings, 25 ft. long. The design of this chiller is more efficient in that it concentrates the cooling coils near the top of the wort, where most of the heat is. Includes tubing and garden hose attachment already installed.
Kegging Equipment Kit- Complete
$ 300.00
Contains 5 Gallon Stainless Steel Ball Lock Keg (select used or new), Black Liquid Disconnect with 1/4" barb, Gray Gas Disconnect with 1/4" MFL, Hose Clamps, Picnic Dispensing Faucet, Hex Nuts For MFL Disconnects, Taprite Primary Dual Gauge Regulator, Swivel Barbs For MFL Disconnect, Picnic Tap and Tubing, Gas Tubing, and 5lb CO2 Tank ...
Mark II Keg Washer
$ 100.00
Conserve time, energy, and water! Mark’s Mark II Keg Washer™ is designed to clean and sanitize large vessels like cornelius kegs and carboys. It is also serves as a sanitation container for miscellaneous items such as airlocks, thermometers, tubing, keg fittings, and more. Includes adapters to clean tubing. You can even set it up to hook to keg ...
Mash Paddle (stainless)
$ 19.75
Made of a heavy duty FOOD GRADE stainless steel. Perfect for mixing and stirring. Dimension of the paddle: Height 4.7" X 3.1" widthTotal Length: 26"
Mashtun (10gal)
$ 185.00
A complete mashtun! Comes with stainless steel ball valve and stainless steel 12" domed false bottom. These work wonderfully for all-grain brewing.
Oxygenation System
$ 55.75
Includes filter, regulator, stainless diffusion stone, and tubing. It's everything you need, except for the disposable oxygen tank, which is available at most hardware stores. Providing sufficient oxygen will help ensure a faster start to fermentation, full attenuation, and helps eliminate off-flavors due to stressed yeast (assuming a proper pit...
Paddle (Plastic)
$ 5.50
24 inches. Perfect paddle for stirring wort or mash. Heat-resistant plastic is suitable for temperatures up to 360F.
PET Carboy
$ 29.75
A heavy, PET plastic carboy ideal for fermentations of wine or beer, including secondary. The material is completely taste and odor free, stain resistant, and impermeable to oxygen. Unlike glass, these are lightweight and virtually unbreakable (no trips to the ER for stitches!). Smooth inner walls prevent sediment from collecting and make for e...
Stainless 1/2" FPT Barb
$ 5.25
1/2" FPT (female pipe thread) with either a 1/2" or 3/8" barb. Perfect for attaching to any 1/2" MPT fitting, such as found on pumps. 304 stainless steel.
Stainless 1/2" FPT Full Coupler
$ 5.25
1/2" FPT (female pipe thread) full coupler has threads through the entire center. Roughly 1.5" length. 304 stainless.
Stainless 1/2" MPT Barb
$ 5.25
1/2" MPT (male pipe thread) with either a 1/2" or 3/8" barb. Perfect for insertion into a ball valve or other 1/2" FPT port. 304 stainless steel.
