Krome D-System Party Keg Pump

Product Description

Serve from a compatible D-system American Sankey keg with the party coupler and 4-inch metal hand pump. The assembly includes a dispensing hose and plastic squeeze-trigger faucet for convenient pouring.

D-system American Sankey connection (most all domestic stainless kegs are D-System)
4-inch metal pump
304 stainless steel coupler body and pull handle
Chrome-plated brass probe
Plastic faucet with squeeze trigger

Confirm your keg uses a D-system connection before ordering.

Manufacturer’s California Proposition 65 warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

$ 0.00

Tab 1

1/2" Auto-Siphon

$ 19.25

26" long 1/2" auto-siphon by Fermtech. Quickly and easily transfers liquids twice as fast as a 3/8" racking cane. Includes 6 feet of 1/2" vinyl tubing. Auto siphon clamp sold separately.

1/2" MPT Fermentap Dial Thermometer

Equipment

$ 31.00

1/2" MPT Fermentap Dial Thermometer

$ 31.00

This is not the weldless assembly, only the dial thermometer with 1/2" MPT threads. This is intended to be threaded into any 1/2" FPT coupler, such as you'll find standard on the Brew Built kettles. Made of 304 stainless steel. 3" face. Available with either a 2.5" probe (more suitable for kettles) or a 6" probe (more appropriate for a mashtun)....

1/2" Stainless Ball Valve

Equipment

$ 16.75

1/2" Stainless Ball Valve

$ 16.75

Built from 304 stainless steel, this ball valve features 1/2" FPT threads on each end. Perfect for kettles, pumps, chillers, or whatever else your system demands. Easy to clean. Just use two wrenches to separate the two piece valve.

1/4" Flare Nut w/ Tailpiece

Equipment

From $ 2.75

1/4" Flare Nut w/ Tailpiece

$ 2.75

These flare hexnuts attach to any 1/4" male flare threads, such as those found on MFL disconnects. You have the option of either a 1/4" barb or 5/16" barb; the former is used for liquid (beer) lines, whereas the latter is common for gas (CO2) lines. Swivel nuts are chrome-plated, but barbs are stainless.

1/4" Stainless Tailpiece

Equipment

$ 4.75

1/4" Stainless Tailpiece

$ 4.75

Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...

12" Laboratory Thermometer

Equipment

$ 7.00

12" Laboratory Thermometer

$ 7.00

If you're looking for a near-instant temperature reading, this laboratory thermometer is the way to go. Has an eye hole at the top for running string through if desired. Range 0- 220F; 0-120C.