Duotight Push-In Fitting - 8mm OD Check Valve

Product Description

This Duotight fitting allows flow in one direction only and is recommended to protect your regulator from beer backflowing through the line. It opens at 1 PSI to allow the gas to flow out but not back. Place these after any splits, tees, or connections to multiple kegs to ensure a leak in one keg doesn't empty the gas from all of your connected kegs.

About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connection under a variety of situations. This makes it very easy to swap fittings and lines without clamps or fear of leaks.

To ensure a leak-proof seal, please cut tubing as squarely as possible, using a razor or very sharp knife. We recommend the Tube Cutter w/ Duotight Removal Tool for this.

$ 3.59

Tab 1

1/2" Auto-Siphon

$ 19.25

26" long 1/2" auto-siphon by Fermtech. Quickly and easily transfers liquids twice as fast as a 3/8" racking cane. Includes 6 feet of 1/2" vinyl tubing. Auto siphon clamp sold separately.

1/2" MPT Fermentap Dial Thermometer

Equipment

$ 31.00

1/2" MPT Fermentap Dial Thermometer

$ 31.00

This is not the weldless assembly, only the dial thermometer with 1/2" MPT threads. This is intended to be threaded into any 1/2" FPT coupler, such as you'll find standard on the Brew Built kettles. Made of 304 stainless steel. 3" face. Available with either a 2.5" probe (more suitable for kettles) or a 6" probe (more appropriate for a mashtun)....

1/2" Stainless Ball Valve

Equipment

$ 16.75

1/2" Stainless Ball Valve

$ 16.75

Built from 304 stainless steel, this ball valve features 1/2" FPT threads on each end. Perfect for kettles, pumps, chillers, or whatever else your system demands. Easy to clean. Just use two wrenches to separate the two piece valve.

1/4" Flare Nut w/ Tailpiece

Equipment

From $ 2.75

1/4" Flare Nut w/ Tailpiece

$ 2.75

These flare hexnuts attach to any 1/4" male flare threads, such as those found on MFL disconnects. You have the option of either a 1/4" barb or 5/16" barb; the former is used for liquid (beer) lines, whereas the latter is common for gas (CO2) lines. Swivel nuts are chrome-plated, but barbs are stainless.

1/4" Stainless Tailpiece

Equipment

$ 4.75

1/4" Stainless Tailpiece

$ 4.75

Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...

12" Laboratory Thermometer

Equipment

$ 7.00

12" Laboratory Thermometer

$ 7.00

If you're looking for a near-instant temperature reading, this laboratory thermometer is the way to go. Has an eye hole at the top for running string through if desired. Range 0- 220F; 0-120C.