Chemical Ice - FROZEN
The biggest mistake a brewer can make is to spend time and money making a quality beer wort or wine must but fail to take the time to clean and sanitize their equipment. All kinds of surprises await the brewer who uses unclean equipment- bacterial infections, wild yeast ferments, gushing bottles, a plethora of off-flavors and aromas... The first step to consistent and predictable results is employing sanitary procedures.
First, it's important to understand that cleaning and sanitizing are two separate procedures, neither one difficult. Cleaning is the act of removing physical particulate matter from something, such as your fermenter. If you have, for example, dried yeast stuck on the sides of your fermenter after doing a ferment, use an appropriate cleaner such as Oxygen Brewery Wash, PBW, or OneStep to help break up the particulates and scrub the surface with a non-abrasive scrubber, brush, or towel. Dish soap is not recommended as soap residue can produce off-flavors and aromas in your product.
Used bottles often benefit from a cleaning as there may be dried yeast sediment or other material in the bottom. The best way to reduce your time and energy cleaning is to clean as soon as possible; rinse bottles out well immediately after emptying them and don't let dirty fermenters sit for long without cleaning. Once particulates dry, they are much harder to remove from surfaces.
Once your equipment is clean, you must sanitize it before subjecting your beer, wine, or other beverage to it. Sanitizing is killing 99.99% of all microorganisms on a surface. To do this, use a food-grade sanitizer such as IoStar or StarSan; bleach is not recommended as it is not food grade, may be difficult to remove from plastics, and trace amounts can produce off-flavors and aromas. Merely mix sanitizers to the recommended concentrations and make sure that the sanitizing solution thoroughly contacts all surfaces of any equipment that will come in contact with your beer or wine. This includes fermenters, airlocks, siphoning equipment, bottles, etc.
Sanitizing procedures should be done just prior to use. Sanitizing a week, day, or even hours prior to using the equipment does no good as it may become recontaminated by airborne yeasts and bacterias in that time period.
If this sounds complicated or like a lot of work, it really isn't. It is, however, absolutely necessary and should never be dismissed. Happy brewing!
30" Carboy Brush
Team me up with a good cleaner such as PBW or OBW and we'll make cleaning that carboy a breeze.
Acid Blend (2 oz.)
Used in wine must preparation for pH adjustment. Can also be added later for balance against overly sweet wine.
All Steel Carboy/Bottle Washer
Great for hitting the inside of your bottles and carboys with a blast of high-pressured water. We include an aerator-to-hose adaptor.
Amylase Enzyme (1 oz.)
Improves starch-to sugar conversion; increases alcohol yield and reduces residual gravity.
Team me up with a good cleaner such as PBW, OBW, or OneStep and we'll make cleaning those used bottles a breeze.
Calcium Chloride (2 oz)
Acidifies mash and creates a more malt-centric, rounded, and sweet profile on the palate.
Campden Tablets (100)
Metabisuphite tablets release sulfur dioxide, which acts as a sterilant and antioxidant. For sterilizing must, use one tablet per gallon; two crushed tablets equal 1/4 teaspoon. Potassium metabisulphite is typically preferred over sodium metabisuphite as it is less prone to flavor contribution. Both are available.
Gypsum (2 oz.)
Calcium sulphate - acidifies mash and accentuates hops whilst crispening the palate. This is food-grade gypsum, not ground up toxic drywall. Ain't that great?
Use 1/2 oz per 2.5-3 gallons of cool or tepid water. Allow 2 minutes contact time with all brewing equipment prior to use. After discarding sanitizing solution, allow equipment to airdry for a few minutes. Tasteless and odorless, and safe to use on all brewing equipment. Should not be discarded into septic tanks.
Environmentally friendly, non-toxic, no-rinse powdered cleanser. Use 1 Tbsp per gallon of warm water and allow oxygen to break down stubborn particles and residue. NOT safe on stainless steel. For a powerful easy-to-dissolve cleaner that is safe on stainless steel, please refer to Oxygen Brewery Wash. Use in conjunction with a quality sanitizer,...
Increases clarity and juice yields. Use 1/2 tsp per gallon of must one hour prior to fermentation. Fruit wines and ciders.
Powdered Brewery Wash
Good ol' PBW. A very powerful easy-to-dissolve cleaner that is safe on stainless steel. Use at full concentration with a prolonged soak to effortlessly remove stubborn build up. We also have a customer that insists this is the best product for cleaning an RV black water tank, so it's great for more than just brew kettles and fermentors. For fer...