Beer Thread Tailpiece Hex Nut
Related Products
1/2" Auto-Siphon
$ 19.25
26" long 1/2" auto-siphon by Fermtech. Quickly and easily transfers liquids twice as fast as a 3/8" racking cane. Includes 6 feet of 1/2" vinyl tubing. Auto siphon clamp sold separately.
1/2" MPT Fermentap Dial Thermometer
$ 31.00
This is not the weldless assembly, only the dial thermometer with 1/2" MPT threads. This is intended to be threaded into any 1/2" FPT coupler, such as you'll find standard on the Brew Built kettles. Made of 304 stainless steel. 3" face. Available with either a 2.5" probe (more suitable for kettles) or a 6" probe (more appropriate for a mashtun)....
1/2" Stainless Ball Valve
$ 16.75
Built from 304 stainless steel, this ball valve features 1/2" FPT threads on each end. Perfect for kettles, pumps, chillers, or whatever else your system demands. Easy to clean. Just use two wrenches to separate the two piece valve.
1/4" Flare Nut w/ Tailpiece
$ 2.75
These flare hexnuts attach to any 1/4" male flare threads, such as those found on MFL disconnects. You have the option of either a 1/4" barb or 5/16" barb; the former is used for liquid (beer) lines, whereas the latter is common for gas (CO2) lines. Swivel nuts are chrome-plated, but barbs are stainless.
1/4" Stainless Tailpiece
$ 4.75
Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...
12" Laboratory Thermometer
$ 7.00
If you're looking for a near-instant temperature reading, this laboratory thermometer is the way to go. Has an eye hole at the top for running string through if desired. Range 0- 220F; 0-120C.
24" Stainless Steel Spoon
$ 17.50
Stainless spoon for stirring wort or mash. Plenty of length to keep your hands out of harms way.
5/16" Stainless Tailpiece
$ 4.50
Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...
6- Way Gas Manifold
$ 69.00
Gas manifold with shutoffs. Hook up 6 gas lines at once.
